AMCO SAFT NICKEL CADMIUM BATTERIES FOR POWER PLANTS, OIL & GAS

KPL – Long rate performance 11 Ah – 1550 Ah
KPL has the thickest plate and is designed for applications where the battery must provide:

  • Reliable energy over long discharge period
  • A current that is relatively low in comparison with the total stored energy
  • Infrequent discharges
KPL is typically used in power back-up and bulk energy storage applications. KPM cell has thick plates to provide a large capacity reserve for long duration discharge such as emergency lighting, alarms, railway signalling, DC instrumentation and photovoltaic system.

KPM – Medium rate performance 10 Ah – 1365 Ah
KPM is designed for applications where the batteries must sustain:

  • Electrical loads between 30 minutes and 3 hours
  • “Mixed” loads which involve high and low discharge rates
  • Frequent or infrequent discharges
KPM type is typically used in power back-up applications.

KPH – High rate performance 8 Ah – 990 Ah
KPH uses very thin plates and is designed for applications demanding

  • A relatively high current over short periods
  • Usually less than 1 hour duration
  • Frequent or infrequent discharges
KPH type is typically used in starting and power back-up applications
AMCO SAFT VALVE REGULATED NICKEL CADMIUM BATTERIES FOR POWER PLANTS, OIL & GAS

VRNM Ni-Cd battery Performance with ultra-low maintenance Developed line with long proven Ni-Cd technology, VRNM is an exceptionaly reliabel ultra-low maintance pocket plate battery incorporating special technical features Delivering long life and requiring no or minimal maintenance, There is no better solution for installations where the risk of failure is unacceptabe, as in:

  • UPS systems
  • Emergency lighting
  • Process control
  • Telecommunications
  • Offshore oil and gas
  • Gas pipelinces
  • Railway signalfing
  • Emergency lighting
  • Security systems
The VRNM Ni-Cd battery is eminently suitable for “remote” applications such as offshore and switching substation operations, where the system must be totally reliable and require minimum number of maintenance visits. VRNM batteries are supplied as single cells of 1.2 V in a capacity range from 9Ah up to 750 Ah.
SAFT NICKEL CADMIUM BATTERIES FOR POWER PLANTS, OIL & GAS

SPH
ENSURING YOUR STARTUP APPLICATIONS START Cranking up an emergency diesel generator engine or switching on heaters, pumps or other equipment requires batteries that are reliable and operates properly at any temperature. SPH batteries recover their voltage instantaneously, making them the ideal choice for starting applications in conditions off-shore, on-shore, on industrial production lines, on telecom equipment and in critical buildings like hospitals.

FUTURES / BENEFITS
    SPH is your key to safety and productivity, efficiently operating wherever and whenever needed.
  • Reliability in critical situations
  • Perfect choice for UPS, engine starting and many other high rate discharge duties
  • Designed for applications demanding a relatively high current over short periods
  • Provide very high currents of up to 20 times the battery's nominal capacity Made from tested and proven
  • Ni-Cd sintered/PBE plate technology
  • Low installation and maintenance costs and no need for water for up to 10 years
  • High power density, fast recharge, narrow voltage window
  • Extremely long life
  • Typical discharge range from 1 second to 30 minutes
TECHNICAL SPECIFICATION
  • Capacity range: 11 Ah to 320 Ah (C5 A rate)
  • Operates in extreme temperatures from - 20°C to + 50°C and tolerates - 50°C to + 70°C for short periods
  • High resistance to electrical abuse
  • Low maintenance
  • Small voltage window
  • Capability to do the same job with a smaller capacity battery, by providing high power in a constrained voltage window
  • Long life time of over 20 years

Alternator Voltage Regulator (AVR), Battery Charger Panel , SCR Control Battery Chargers SCR Control Battery Chargers

“Anushri” Make Battery charger Panel having FCBC / FC-FCBC / FCBC-FCBC to charger 110V/220V of 100/200/300/400/500/600AH Batteries with output 110V/220V with a Max Charging current as per customer requirement. Input 230V 1P / 415V 3P 50Hz with Technical features & specifications as mentioned below :

Technical Features:
  • Charger will have FCBC / FC-FCBC / FCBC-FCBC.
  • Single heat sink used and devices are directly mounted rigidly such that heat can transferred by conduction, convention and radiation.
  • All Components are liberally designed such that all components function with in limits even at advance condition.
  • Heat Sinks are designed for natural cooling however to give long life a cooling fan is given.
  • Fuse failure relay is given to monitor the semiconductor fuses.
  • RC Snubber is connected across the power semiconductor to protect against voltage surges.
  • High Reactance transformer to protect against current surges.
  • Semiconductor fuses are provided against short circuits.
  • Input AC Voltmeter and Output DC Voltmeter and Ammeter are given to read input and output parameters.
  • A Battery Protection relay is given to protect against AC Under/ Over Voltage, DC Under/ over voltage, DC over Current and Battery Earth fault.
  • Provision is given to charge the Battery in Auto or in Manual mode. In Auto mode depending on Battery Voltage the charge will Charge the battery in Boost
    or Float or Trickle Mode. In Manual mode the boost or Float Can be selected.
  • All indication Lamps are LED type to give long life.
  • If One Charger failed then automatically second charger will be switched ON and Annunciation also given.


Centre for Marketing & Management Development